What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 29.06.2025 02:40

It seems Mohan does not understand the difference between a comment and an Answer.
It also is a device that limits the change in current flow.
In schematic diagrams this is the symbol for a fuse:
Jennifer Garner smooches boyfriend John Miller at charity event in rare PDA moment - Page Six
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
What is lightning?
a photo is worth a thousand words.
Kanye “Ye” West Makes Brief Appearance at Sean “Diddy” Combs Trial - The Hollywood Reporter
eight
A circuit breaker is similar, but is resettable.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What can we learn from the fatal shooting of UnitedHealth CEO Brian Thompson?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
These are simplified answers to the original question, and does not change anything I wrote above.
so, what happens?
Orioles Designate Emmanuel Rivera For Assignment, Option Heston Kjerstad - MLB Trade Rumors
Upvotes:
There are two important concepts here.
2024–10–14 [Omar Gharbi Omar Gharbi ]
but this device (an Inductor) … impedes the rapid changes in the current.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Now when you have a certain ac resistance, then a current flows in a loop.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–10[John johnson John Johnson ]
The bolt then partially travels down the line to your home.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Here is a simplified AC power diagram.
So, the voltage could go up to 500 volts, and the fuse will not open up.
What is the science behind red light therapy?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
An AC voltage/ current source, and an ac inductive load.
He then asserts :
Dozens of Israeli children develop malignant tumors from sperm donor - The Jerusalem Post
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Because the load is inductive, the current lags the voltage.(by a bit).
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
[image of Common-mode choke]
Science-Backed Tips for Increasing Your Stamina at Any Age - Prevention
First Sentence:
I post the exact comment here.
But… the neutral is now “floating” because of the 1 ohm resistance.
Why are you a Muslim? Why is it Islam for you and not something else?
This is where the MOV conducts again, and dissipated the energy.
(Dc diagram shown, AC is similar).
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
What is the most heartbreaking thing your child has told you?
The MOV will conduct when the voltage exceeds 50% of line voltage.
A fuse is a non-resetable over current circuit protector.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
The third is lightning and “how it gets conducted into a home.”
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is 'the assistant's answer'
At least they know the answer if they wanted it.
Barnstars:
But it can get overloaded, and no longer works.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This one hit behind the barn.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
what exactly is a ‘surge’ protector?
What does a fuse do?
The other is “what does a “fuse” do?”
but I think this circuit , shows a few more pieces.
This device then solves the entire problem.
For this case there are devices called Metal oxide varistors (MOV).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
the problem then depends on "how fast does the fuse operate?".
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
These devices are installed between the “hot” and “neutral” and protective ground.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
One is “what exactly is in a ‘surge protector’ ? ”
One
Edit 2024–10.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
There are three different concepts here that are getting confused.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
[old diagram got deleted by accident]
He then describes the function of a fuse.
He then describes Rainy Season and Lightning.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
nine
2024–10–16 [ OO OLAOYE OYEBODE ]